| SMC
Roving This roving is specially designed to as reinforcements for thermoset resins used in Sheet Molding Compound (SMC). Suitable for manufacturing automobile fenders, chairs, bathtub, water tanks, sporting goods and other simple or complicated products. |
 |
Technical Characteristic
| Product No. | Type of Glass | FilamentDiameter (¦Ìm) | Sizing Content (%) | Moisture Content (%) | ApplicableField |
| SMC-1 | E | 13 | 1.30¡À0.25 | <0.15 | Structure |
| SMC-2 | E | 13 | 1.30¡À0.25 | <0.15 | Surface |
| SMC-3 | C | 13 | 1.30¡À0.25 | <0.20 | Structure |
Individual and Bulk Packaging
Each bobbin is packed in a polythene bag. 48 or 64 bobbins are packed in a carton. The assembly is wrapped onto the pallet and protected by a shrink-wrap film. A vertical FRP tube reinforces the 4 corners of the pallet.
| Roll Weight(kg) | Levels per pallet | Rolls per Level | Total Rolls | Net Weight per Pallet(kg) | |
| Small Pallet | 16 | 3 | 16 | 48 | 768 |
| Big Pallet | 16 | 4 | 16 | 64 | 1024 |
20 small pallets are loaded in 20' container, total net weight is 15,360 kgs.
If permitted, 10 small and 10 big pallets are loaded in 20' container, total net weight is 17,920 kgs.
 |